<div>> On Tue, Jan 11, 2011 at 3:28 PM, Paul Buchanan <paul.buchanan [at] gmail>wrote: </div><div>> ></div><div>> > I have an old USB tuner box which I'm 95% sure is an Artec T1 (because </div><div>
> > it looks just like this: </div><div>> > <a href="http://www.zdnet.de/i/news/200502/artec_t1.jpg">http://www.zdnet.de/i/news/200502/artec_t1.jpg</a>). </div><div>> > </div><div>> > I have been able to see some acknowledgement of it being plugged in </div>
<div>> > when I run lsusb but even though I have added the </div><div>> > dvb-usb-dibusb-5.0.0.11.fw firmware and loaded dvb_usb_dibusb_mb and </div><div>> > dib3000mc modules as I've seen described on various forum posts, the </div>
<div>> > lights don't turn on and it doesn't appear to be available in mythtv </div><div>> > setup. </div><div>> > </div><div>> > If anyone could offer me assistance here I would be so grateful. </div>
<div>> > </div><div>> </div><div>> Hi Paul, </div><div>> It would help if you could post the last few lines of the output from </div><div>> 'dmesg' after loading those modules - if you don't see anything, that may </div>
<div>> indicate that the device is not being recognized by the drivers. </div><div>> In addition, it would be useful to check the output of 'lsusb' - you should </div><div>> be able to see an entry for your device. </div>
<div>> </div><div>> For instance, on my system, I see the following line in the lsusb output for </div><div>> my USB tuner: </div><div>> </div><div>> Bus 001 Device 003: ID 2304:023b Pinnacle Systems, Inc. </div>
<div>> </div><div>> And I see the following in the dmesg output, indicating that it's been </div><div>> activated by the appropriate driver (xc5000): </div><div>> </div><div>> xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... </div>
<div>> firmware: requesting dvb-fe-xc5000-1.6.114.fw </div><div>> xc5000: firmware read 12401 bytes. </div><div>> xc5000: firmware uploading... </div><div>> xc5000: firmware upload complete... </div><div>> </div>
<div>> Of course, since your device uses another driver, so the report will look a </div><div>> little different. Good luck. </div><div>> -Greg</div><br>Hi Greg<div><br></div><div>Here is lsusb:<br><div><br>Bus 005 Device 002: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1<br>
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 002 Device 002: ID 0547:2235 Anchor Chips, Inc. AN2235 EZUSB-FX Microcontroller<br>
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter<br>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br></div>
</div><div><br></div><div>The AN2235 line is the USB tuner box.</div><div><br></div><div>The dmesg contained some lines like this:</div><div><br></div><div><div>[11000.264016] tda1004x: setting up plls for 48MHz sampling clock</div>
<div>[11000.548016] tda1004x: found firmware revision 20 -- ok</div></div><div><br></div><div><br></div><div>But I know that they are for a different tuner in my system - the ASUS MyCinema P7131.</div><div><br></div><div>
What does this indicate?</div><div><br></div><div><br></div><div>Paul</div><div><br></div><div><br></div><div><br></div>