<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.26.3">
</HEAD>
<BODY>
On Wed, 2010-05-26 at 09:48 -0700, Clay wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
coffee wrote:
> Hello Everyone,
>
> I have just subscribed to the list again.
>
> The other day my remote control quit working. HUmmmm? I have not done
> any upgrades and have the correct settings
> set in the mythtvfrontend setup for the remote. But going thru my logs I
> found the following error:
> ...
> -------------------------------------------------
>
> Im thinking right now, Swap the receiver to the other cards port and
> perhaps back in business? Can I get that lucky?
>
> thanks for any input on this problem,
>
Years ago, I pinched the wire to the IR receiver putting the cover on my
mythbox. It borked something on the card since swapping out the IR
didn't fix the problem.
To lazy to open the box and swap the cards, I plugged the IR into the
other pvr-150 and fumbled around the config files to point at card #2
for remote signals.
</PRE>
</BLOCKQUOTE>
Do you remember how you did that? I havent fiddled with modprobe since they changed it away from /etc/modprobe.conf.<BR>
<BR>
??<BR>
<BR>
coffee
</BODY>
</HTML>