So I connected the Motorolla DCT-6416 svideo to the HD-PVR along with
rca cables, but stll not working. The front svideo and rca jacks on the
HD-PVR work with Windows. I confirmed this using my Wii because the
DCT-6200 is too far away. I also know that the Svideo connection on the
cable box works with my pvr-150. <br>
<br>Here is the error in mythbackend.log:<br><br>2010-05-22 07:46:08.300
TVRec(3): Changing from None to WatchingLiveTV<br>2010-05-22
07:46:08.306 TVRec(3): HW Tuner: 3->3<br>2010-05-22 07:46:08.540
Channel(/dev/video1): SetInputAndFormat() failed<br>
2010-05-22 07:46:08.540 TVRec(3) Error: Failed to set channel to 930.
Reverting to kState_Non<br><br>When I plug in the HD-PVR, I get this in
dmesg:<br><br>[42994.600036] usb 1-1: new high speed USB device using
ehci_hcd and address 6<br>
[42994.777875] usb 1-1: configuration #1 chosen from 1 choice<br>[42994.779524]
hdpvr 1-1:1.0: untested firmware version 0x12, the driver might not
work<br>[42995.091833] hdpvr 1-1:1.0: device now attached to /dev/video4<br>
<br>However there is no /dev/video4:<br><br># ls -la /dev/video*<br>crw-rw----+
1 root video 81, 0 2010-05-21 20:05 /dev/video0<br>crw-rw----+ 1 root
video 81, 4 2010-05-22 08:01 /dev/video1<br>crw-rw----+ 1 root video 81,
3 2010-05-21 20:05 /dev/video24<br>
crw-rw----+ 1 root video 81, 1 2010-05-21 20:05 /dev/video32<br><br>cat /dev/video1 was working before but now I get:<br>
<br>
stephen@mythbox:~$ cat /dev/video1 > test.ts<br>
cat: write error: Bad address