<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
On 4/1/2010 2:57 PM, Jarod Wilson wrote:
<blockquote
cite="mid:w2nbe3a4a1004011457x222fe944od48827278797babc@mail.gmail.com"
type="cite">
<pre wrap="">On Thu, Apr 1, 2010 at 5:41 PM, Marc Chamberlin <a class="moz-txt-link-rfc2396E" href="mailto:marc@marcchamberlin.com"><marc@marcchamberlin.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">On 4/1/2010 2:05 PM, Scott wrote:
</pre>
</blockquote>
<pre wrap="">...
</pre>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">Thanks again Jarod for your thoughts/help... I took the plunge and
removed the ir-kbd-i2c kernel module and installed the lirc-i2c and lirc-dev
modules. Double checked the /etc/sysconfig/lirc /etc/lircd.conf and my
.lircrc files and to the best of my understanding they seem correct. If you
like I could attach them and send them in to be looked over... I then
restarted the lirc daemon and no joy! Now nothing from my remote is being
recognized by any of the aforementioned utilities..
Thoughts? Marc..
</pre>
</blockquote>
<pre wrap="">
i would post the dmesg stuff and your lircd.conf
also if irw doesnt do anything try mode2, if that shows something then its
the lircd.conf
</pre>
</blockquote>
<pre wrap="">
Thanks Scott for your suggestions... I probably should clear out my
/var/log/messages file first before posting dmesg stuff, kinda lengthy when
I grep for lirc lines... But first I am trying to figure out/understand how
to make the kernel module changes I made persistent when I reboot.. This is
new territory for me and I don't fully grok it yet...
I have attached my lircd.conf... As for using mode2, the man pages tell me
that it only works with home brewed ir receivers, not with TV cards that
decode the IR signal.. I am using the IR port on the Hauppauge PVR-350
receiver so I don't think mode2 will work for me...
</pre>
</blockquote>
<pre wrap="">
lircd.conf isn't actually interesting, its the /etc/sysconfig/lirc
file and dmesg that will shed more light on what's going on. And I'd
test for remote functionality just using irw to start out, since it
doesn't rely on a properly set up lircrc.
</pre>
</blockquote>
<font face="Times New Roman, Times, serif">Ok, attached is my lirc file
and I grepped the dmesg output for any lines that contains "lirc" and
truncated the file to show changes just before and after I reconfigured
the kernel modules.. irw is not showing any responses to my remote.
Hope this is helpful... <br>
<br>
Marc..<br>
<br>
<br>
<br>
</font>
</body>
</html>