<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 12pt; color: #000000'>----- "Big Wave Dave" <bigwavedave@gmail.com> wrote:
<br>> On Sat, Jan 16, 2010 at 8:43 AM, Phusion <phusion2k@gmail.com> wrote:<br>> > I am in need of some advice when trying to scan for digital channels<br>> > using the Hauppauge HVR-1600. I am using Mythdora 10.21 and have<br>> > upgraded to MythTV 0.22.2 using yum. I have followed the instructions<br>> > on http://www.mythtv.org/wiki/Hauppauge_HVR-1600, but haven't had any<br>> > luck getting any channels using the drivers from linuxtv.org. I have<br>> > tried scanning for channels in mythtv-setup as well as the method in<br>> > http://www.mythtv.org/wiki/DVB_search which first gets a list of<br>> > channels then uses scan.sh to try and record. Please advise.<br>> ><br>> > Phusion<br>> <br>> I am not sure if this applies to you, but you may want to look at:<br>> http://www.mythtv.org/wiki/Comcast_Users_And_scte65scan<br><br>I have a similar card (the HVR-2250). Even if you don't use scte65scan, it is unusual for the card not to see ANY channels.<br><br>I would also check to be sure that the firmware is in the right spot, and that it is being loaded. Check /var/log/messages for lines that relate to the card. You might see a "can't find firmware" message, in which case moving the files around might be in order. (I am not near my machine so I can't make suggestions.)<br></div></body></html>