<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Jarod Wilson wrote:
<blockquote cite="mid:200908291529.40791.jarod@wilsonet.com" type="cite"><br>
<blockquote type="cite">
<pre wrap="">I only note a few missing codes. I can make the mods to the lircd.conf
and send it to you for inclusion if you wish. For reference, I am using
a Harmony remote with RM200 codes programmed in
</pre>
</blockquote>
<pre wrap=""><!---->
Odd. I've got an RM200 myself, and all the buttons work perfectly, as
do all the buttons on my Harmony 880, which is programmed via a config
found in Logitech's db by looking for Antec Veris, iirc...
But sure, hit me with any additions you've got, and I'll put them into
lirc cvs. Doesn't hurt to have more codes added.
</pre>
</blockquote>
ok. I have two missing codes and one that does not work at all:<br>
<br>
The following are missing but are codes that I can send from my harmony
890 and receive through your driver:<br>
KEY_MENU 0x2ba385b700000201<br>
## The above is very close to your KEY_MENU value and I noticed in
other web entries that both can show up (perhaps slightly different
remotes)<br>
KEY_DVD 0x29a295b700000201<br>
## Note for KEY_DVD above, the Harmony's version of RM200 labels this
also as "Purple"<br>
<br>
Oddly the following code for MouseKeyboard does not work. I don't even
receive the IR code with mode2. yet with the previous driver
(0.8.5pre1) this code worked fine. Your lircd.conf has the correct code
that I use in 0.8.5pre1 as well, it just never shows up. Strange. <br>
<br>
Christian<br>
<br>
</body>
</html>