Hi,<br>I'm running 0.21.20080304-1 from the Debian multimedia repo on a combined BE/FE using Lenny.<br><br>I used to have a PVR-500 that worked perfectly then I added an HVR-1600 when the comcast switched to mostly digital. That setup worked pretty well except my signal strength was not sufficient for good digital reception.<br>
<br>Long story short, I got my wiring redone to improve SNR so digital tv looks good and swapped my HVR-1600 with a HVR-2250 since 1 digital tuner wasn't enough and I'm short on PCI/PCIe slots.<br><br>In the past 2 weeks I've had about 4 hard locks, usually when the frontend was idle. Keyboard numlock, capslock etc won't toggle, the machine doesn't respond over the network and strangest of all the display is frozen (but not corrupted) showing the frontend.<br>
<br>I turned on logging on the backend and launched the frontend with:<br>mythfrontend -v important,media,audio,playback -l mythfrontend.log<br><br>However I'm not getting any indications in the logs (or the system logs) what caused these hangs. What I can see is that a single recording started on the HVR-2250 at the time of the hang and that file was found to be corrupted/missing upon restart.<br>
<br>I followed the instructions here for setup of the HVR-2250 <a href="http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200">http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200</a> with the addition of changing Max recordings to 1 (something I guessed applied to each tuner in HVR-2250 since it applied to the HVR-1600). <br>
<br><a href="http://www.mythtv.org/wiki/Hauppauge_hvr-1600#Configuration">http://www.mythtv.org/wiki/Hauppauge_hvr-1600#Configuration</a> -> Configure the ATSC... -> step #6)<br><br>Any suggestions for increased log levels that might shed light on this?<br>
<br>Anyone else seeing similar problems with HVR-22X0?<br><br>Other than these incidents my HVR-2250 seems to work quite well but this lack of stability is ruining WAF. Any help is appreciated.<br><br>Matt<br><br>P.S. I noticed that most posting about the HVR-2250 are using firmware 1.0.2 for this card. I'm using 1.0.3 since that's what came with the packages when I downloaded them. Worth reverting the firmware to 1.0.2?<br>