<div dir="ltr">I have a Directv H20 receiver, and have been trying to get channel changing working reliably through the USB connection. It seems to work just fine for a day or 2, but then the receiver will stop responding via the usb port:<br>
Initializing Serial Port: /dev/ttyS0<br>SEND: 0xFA [ú] 0xA5 [¥] 0x0 [] 0x1 [] 0xE8 [è]<br>RECV: Timeout Error<br><br>All other functions on the H20 see to work fine, it's just the USB port that stops responding<br>The only solution I have found to reset the H20 via the red button. Immediately after that, the script will work again for a few days at the most.<br>
<br>I'm looking for feedback from others as to if anyone else is having similar issues. The references I have found indicate that others have this working without issue: <a href="http://www.gossamer-threads.com/lists/engine?do=post_view_flat;post=319270;page=1;mh=-1;list=mythtv;sb=post_latest_reply;so=ASC" target="_blank">http://www.gossamer-threads.com/lists/engine?do=post_view_flat;post=319270;page=1;mh=-1;list=mythtv;sb=post_latest_reply;so=ASC</a><br>
<br>Thanks<br>Dave<br></div>