<div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div><div class="Wj3C7c">> hdhomerun_config 1013xxxx set /ir/target "<a href="http://192.168.2.101:5000" target="_blank">192.168.2.101:5000</a> no_clear"<br>
><br>
> Then, I killed the running lircd and re-launched with:<br>
><br>
> lircd -H udp -d 5000<br>
><br>
> Then, I started irw to see if I was getting anythng. Nothing showed up with<br>
> keypresses from my DirecTV peanut remote.<br>
><br>
> sudo tcpdump -nS -i eth1<br>
><br></div></div></blockquote><div><br>I don't remember the exact process I used, but I'll try...<br>I have DRIVER="udp" and DEVICE="5000" into /etc/lirc/hardware.conf<br><br>I'm just using my TV remote in the DVD mode for myth, so I used irrecord to make my own /etc/lirc/lircd.conf<br>
<br>You have to make sure you have the right kernel modules too. I think I recompiled my kernel and put LIRC_MODULES="i2c, udp" into /etc/lirc/lirc-modules-source.conf<br>Looking at that machine now, I have udp support built-in and various i2c modules loaded. I think this was the step that allowed irw to show incoming commands.<br>
<br>HTH<br>-Jason<br></div></div>