<br><br><b><i>Ronald Frazier &lt;ron@ronfrazier.net&gt;</i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> Is this a new setup or did it just start doing this? Also what type of<br>IR receiver is it?<br><br>I'm not sure why it would only happen with the frontend running. If<br>it's (not sure of the correct terminology here) a polled sensor rather<br>than one that has a microchip and does it's own decoding, then maybe<br>having extra processes running is causing it to not poll in time.<br><br>Have you tried recreating your lircd.conf file? I had a strange<br>problem with lirc once where irrecord determined there were fewer bits<br>being sent than there actually were. As a result it was getting<br>buttons confused. Also, you could try adjusting the gap parameter in<br>lircd.conf. Maybe it's set too low, so it thinks the repeat is a<br>separate press. I've had the opposite problem...where the gap
 was<br>really high and it thought my second press was a repeat (even if I<br>pressed the button slowly).<br><br>-- <br>Ron<br></blockquote>Well, I stumbled on the solution and I first I did not believe it, but I can reproduce it anytime I want.<br><br>The problem went away when I switch from the nv kernel module to the nvidia one<br><br>WHAT?<br><br>Yep, I put the nv module in xorg.conf, the remote doesn't work properly with mythtv (and only mythtv as far as I could tell)<br><br>I remove the nv module and put the nvidia module.&nbsp; remote works great, faster and without _ever_ giving me the double zero's.<br><br>Anyone has any ideas?&nbsp; I'd be happy --if anyone has any questions about my hardware-- to answer any questions, but you better email me directly.<br><br><br>-jose-<br><br>