With the impending Zap2it shutdown and transition to Schedules Direct, I figured it was time to finally update my MythTV box. I had been running on Fedora Core 4. I had issues when I tried to jump to Fedora 7, so I ended up going to Fedora Core 6.
<br><br>I've worked through most of the issues that I've had, but there's one I can't seem to get through. When I first installed this, I used Jarod's guide with only slight deviations. The error I'm currently getting is when I try to startx:
<br><br>=== Start Paste ===<br>xauth: creating new authority file /root/.serverauth.3552<br><br><br>X Window System Version 7.1.1<br>Release Date: 12 May 2006<br>X Protocol Version 11, Revision 0, Release 7.1.1<br>Build Operating System: Linux
2.6.9-55.ELsmp i686 Red Hat, Inc.<br>Current Operating System: Linux <a href="http://mythtv.steenhagen.us">mythtv.steenhagen.us</a> 2.6.22.2-42.fc6 #1 SMP Wed Aug 15 12:34:26 EDT 2007 i686<br>Build Date: 18 June 2007<br>Build ID: xorg-x11-server
1.1.1-47.10.fc6<br> Before reporting problems, check <a href="http://wiki.x.org">http://wiki.x.org</a><br> to make sure that you have the latest version.<br>Module Loader present<br>Markers: (--) probed, (**) from config file, (==) default setting,
<br> (++) from command line, (!!) notice, (II) informational,<br> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.<br>(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 26 20:23:27 2007
<br>(==) Using config file: "/etc/X11/xorg.conf"<br>(EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device /dev/fb1<br>(EE) Screen 0 deleted because of no matching config section.<br>(EE) Device(s) detected, but none match those in the config file.
<br><br>Fatal server error:<br>no screens found<br>XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"<br> after 0 requests (0 known processed) with 0 events remaining.<br><br>=== End Paste ===
<br><br>I just can't seem to get past this.... so here's a few things in my install that may be relevant.<br><br>[root@mythtv ~]# rpm -qa | grep ivtv<br>ivtv-kmdl-2.6.22.2-42.fc6-1.0.2-134.fc6<br><a href="http://perl-Video-ivtv-0.13-8.fc6.at">
perl-Video-ivtv-0.13-8.fc6.at</a><br><a href="http://ivtv-firmware-20070217-13.at">ivtv-firmware-20070217-13.at</a><br>ivtv_xdriver-0.10.7-8_r3843.fc6.at<br>ivtv-1.0.2-134.fc6<br><br><br>Aug 26 20:17:14 mythtv kernel: ivtv: ==================== START INIT IVTV ====================
<br>Aug 26 20:17:14 mythtv kernel: ivtv: version 1.0.0 (2.6.22.2-42.fc6 SMP mod_unload 686 4KSTACKS ) loading<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based)<br>Aug 26 20:17:14 mythtv kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<br>Aug 26 20:17:14 mythtv kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11<br>Aug 26 20:17:14 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (3747975632 bytes)
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (3747975640 bytes)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Encoder revision: 0x02060039<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Decoder revision: 0x02020023
<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 8083337<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: audio processor is MSP4448 (idx 27)<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: decoder processor is SAA7115 (idx 19)<br>Aug 26 20:17:14 mythtv kernel: tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350<br>Aug 26 20:17:14 mythtv kernel: tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)<br>Aug 26 20:17:14 mythtv kernel: tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
<br>Aug 26 20:17:14 mythtv kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>Aug 26 20:17:14 mythtv kernel: saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)<br>Aug 26 20:17:14 mythtv kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
<br>Aug 26 20:17:14 mythtv kernel: msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)<br>Aug 26 20:17:14 mythtv kernel: msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect<br>Aug 26 20:17:14 mythtv kernel: tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device video32 for encoder YUV (2 MB)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB)
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device radio0 for encoder radio<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device video16 for decoder MPEG (1 MB)
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device vbi8 for decoder VBI (1 MB)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device vbi16 for decoder VOUT<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Registered device video48 for decoder YUV (1 MB)
<br>Aug 26 20:17:14 mythtv kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (3747977320 bytes)<br>Aug 26 20:17:14 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0<br>Aug 26 20:17:14 mythtv kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<br>Aug 26 20:17:14 mythtv kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10<br>Aug 26 20:17:14 mythtv kernel: ivtv: ==================== END INIT IVTV ====================
<br><br><br>[root@mythtv ~]# grep 'fb.' /var/log/messages<br>Aug 26 20:17:14 mythtv kernel: vesafb: framebuffer at 0xf8000000, mapped to 0xe0880000, using 3072k, total 16384k<br>Aug 26 20:17:14 mythtv kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=9
<br>Aug 26 20:17:14 mythtv kernel: vesafb: protected mode interface info at c000:49a4<br>Aug 26 20:17:14 mythtv kernel: vesafb: pmi: set display start = c00c4a12, set palette = c00c4a4c<br>Aug 26 20:17:14 mythtv kernel: vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
<br>Aug 26 20:17:14 mythtv kernel: vesafb: scrolling: redraw<br>Aug 26 20:17:14 mythtv kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0<br>Aug 26 20:17:14 mythtv kernel: fb0: VESA VGA frame buffer device<br>Aug 26 20:17:14 mythtv kernel: ivtv_fb: no version for "struct_module" found: kernel tainted.
<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Framebuffer at 0xf5510000, mapped to 0xe1a90000, size 1665k<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: === Validated display mode ===<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display size 640x400 (640x400 Virtual) @ 8bpp
<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display position 41,41<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display filter : on<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Color space : RGB<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: === Display mode change ===
<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display size 640x400 (640x400 Virtual) @ 8bpp<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display position 41,41<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Display filter : on
<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Color space : RGB<br>Aug 26 20:17:14 mythtv kernel: ivtv0-fb: Framebuffer registered on ivtv card id 0<br><br><br><br>If anyone has any brilliant ideas how to get the frame buffer working again on my PVR-350, I'd really appreciate it.
<br><br><br>-- <br><a href="http://jacob.steenhagen.us">http://jacob.steenhagen.us</a>