<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.12.3">
</HEAD>
<BODY>
<BR>
<BR>
<BLOCKQUOTE TYPE=CITE>
<PRE>
<FONT COLOR="#000000">I'm at 6 degrees south. My manual said to turn with Diseqc to the</FONT>
<FONT COLOR="#000000">nearest satellite with the lowest power (in my case Sirius at 5 east)</FONT>
<FONT COLOR="#000000">Then I needed to turn the rotor until I got an image on my TV. To my</FONT>
<FONT COLOR="#000000">knowledge 19.2e on the scale must be the 19.2e satellite.</FONT>
<FONT COLOR="#000000">Besides: my setup worked for 3 years with a Dreambox DM500 and a MVision</FONT>
<FONT COLOR="#000000">receiver using USALS (Diseqc 1.3)</FONT>
<FONT COLOR="#000000">_______________________________________________</FONT>
<FONT COLOR="#000000">mythtv-users mailing list</FONT>
<FONT COLOR="#000000"><A HREF="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</A></FONT>
<FONT COLOR="#000000"><A HREF="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</A></FONT>
</PRE>
</BLOCKQUOTE>
<BR>
I'm using one of these motors and have been for a while. Best way with Mythtv is to use USALS. Set your dish up to point DUE SOUTH. Set the elevation and azimuth as per the book. <BR>
<BR>
Then in Myth, set up your motor in the diseqc tree - don't forget to add your LNB after the motor. Then add a satellite that's in the sound like 91W or similar (depending on LNB you have). Do a scan for channels or something similar and the dish/motor will turn to point to that satellite. If everything was setup properly you should see a lock. If you don't, then you have to loosen some ofthe bolts and turn the entire thing ease/west up/down until you get the strongest signal. After you have locked onto this first satellite, you should have no problems getting the rest in!<BR>
<BR>
Good luck.<BR>
<BR>
Norm
</BODY>
</HTML>