<br><br><div><span class="gmail_quote">On 5/8/07, <b class="gmail_sendername">Adrian Skehill</b> <<a href="mailto:adrian.skehill@gmail.com">adrian.skehill@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi Guys,<br><br>I thought this would be reasonably obvious but I'm not having any luck googling on this topic. I recently upgraded my super reliable myth box to 7.04,(AMD 3200, 64bit) and hoped to add the Hauppague 3000 to the box which already was running a 350. However, it's then the trouble began, and now I can't used either card, so I'm hoping somebody here as some advice!
<br><br>The 350 worked for a bit with ivtv 0.10.1 which comes with Ubuntu, however after about 15 mins, the IRQ (11 in this case) gets disabled, and the card eventually gets shutdown. I read from here and on ivtv-devel that there are problems with ivtv and interrupts, but that was for clock skew. Has anybody got this working?
<br><br>Secondly, the 3000 (even when just in the box on its own) cannot give me any analouge TV. When I go to cat /dev/video0 I get Input / Output error. It's an cx88 based chipset, and there's no obvious errors in the syslog.
<br><br>Hopefully I'm missing something really obvious here, any help you have to offer is much appreciated!<br><br>Thanks,<br><span class="sg">Adrian.</span></blockquote><div><br>I run a PVR350 and a pcHDTV HD-5500. The HD-5500 uses the cx8800 driver for NTSC capture. I've never been totally successful getting both NTSC/ATSC on the HD-5500 while having the PVR-350 installed at the same time. However I am able to use the ATSC side of my HD-5000 and the PVR350 at the same time in MythTV. I have to make sure that the ivtv drivers get loaded first and then I load the cx88-dvb driver.
<br><br>To do this I blacklisted these drivers:<br>cx88-blackbird<br>cx8800<br>cx88-dvb<br><br>Then I put this in /etc/modules:<br>cx88-dvb<br><br>If I load the cx8800 driver I can get the NTSC side of my HD-5500 working with TVTime, just not in MythTV. Also I had to manually make a
channels.conf file to import into MythTV for ATSC on my HD-5500. Scanning doesn't work for me in MythTV.<br><br>TK<br></div><br></div><br>