On 1/15/07, <b class="gmail_sendername">R. G. Newbury</b> &lt;<a href="mailto:newbury@mandamus.org">newbury@mandamus.org</a>&gt; wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
When you connect the comcast settop box to the PVR150, you will not be<br>tuning using the PVR 150. You will be tuning using the STB. The PVR will<br>always be set on &#39;3&#39; or &#39;4&#39;, and you will use an auxiliary command
<br>(through an IR blaster, usually) to control the STB. The input will<br>likely be S-video, not the coax input. You do NOT use the same command<br>setup to tune the PVR 250.<br><br>Each lineup is a unique set of channels which is tuned by the same setup
<br>and method. You may have multiple tuners which respond to the same<br>tuning parameters (each half of a PVR500 for example). But any channel<br>which is tuned by a different set of parameters must be in a different<br>
lineup. Duplicated channels are not permitted because the system cannot<br>know which tuning method is the correct one.<br><br>You may (incorrectly) assume that myth knows how to tune each tuner, and<br>therefore knows how to tune a given channel. But in fact, myth only
<br>knows how to apply the listed tuning parameters given for a channel, to<br>the indicated (allowed) tuner. If the tuning parameters were actually<br>for a different tuner, it would have no way of knowing because it does
<br>not tune that way.</blockquote><div><br>This is tangential to the discussion, but I figure you probably know the answer - when you go into Watch TV, how does Myth decide which tuner it&#39;s going to use?&nbsp; It doesn&#39;t seem to be the one with the highest priority.&nbsp; Is it always tuner #1?
<br><br>-Jerry<br></div></div>