<html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans Serif">
<p>Hi All,</p>
<p></p>
<p>I'm toying with a dvb-t300 that appears to be almost there...</p>
<p>I tried 2.6.17, but couldn't get the dvb-t300 nor the 0.7 series ivtv drivers, for the --normally working well-- hauppage pvr-250mce, to work at all. </p>
<p>Reverted to 2.6.16, no luck with the stock kernel drivers => installed v4l-dvb-a3a095225de1. & 0.6.3 ivtv => looking better..... but unable to get mythtv to successfully use the new dvbt-300 card.</p>
<p>I was unable to get anything out of the analogue or dvb of the dvbt-300, despite all devices being created as you'd like them to. </p>
<p>I suspect tuner type issues may be at hand...?</p>
<p>Nothing from the analogue tuner which is listed in saa7134-cards.c as a TD1316; on the card is also a TDA9886TS that loads with a TDA9887 tuner.</p>
<p>After creating the relevant transports for AU and scanning in mythtv, no lock ony any channel, despite signal strength >= 58%</p>
<p>Import of channel info from zap did not assist still unable to get lock on dvb.</p>
<p>The correct tuner appears to be detected ... on card lists as a TDA10046A & dmesg shows TDA10046H frontend. </p>
<p>Are there any module parameters to play with here for the tuner modules e.g. a PAL setting?</p>
<p>I've had a dig around the relevant c files but can't see anything obvious.</p>
<p></p>
<p>Better still, can anyone tell me that they have a dvbt-300 behaving and what it took?</p>
<p>Cheers,</p>
<p>Lew</p>
<p>A bit more detail below for anyone interested in picking through the heap below in search of something to fit the picture together. </p>
<p></p>
<p>relevant dmesg entries...</p>
<p>saa7130/34: v4l2 driver version 0.2.14 loaded</p>
<p>saa7134[0]: found at 0000:02:07.0, rev: 1, irq: 201, latency: 32, mmio: 0xf500a000</p>
<p>saa7134[0]: subsystem: 185b:c900, board: Compro Videomate DVB-T300 [card=70,autodetected]</p>
<p>saa7134[0]: board init: gpio is 843f00</p>
<p>input: saa7134 IR (Compro Videomate DV as /class/input/input2</p>
<p>saa7134[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92</p>
<p>saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff</p>
<p>saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 87 ff ff ff ff</p>
<p>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff</p>
<p>saa7134[0]: i2c eeprom 40: ff 02 00 c2 86 10 ff ff ff ff ff ff ff ff ff ff</p>
<p>saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb</p>
<p>saa7134[0]: i2c eeprom 60: 34 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff</p>
<p>saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff</p>
<p>tuner 2-0061: chip found @ 0xc2 (saa7134[0])</p>
<p>tuner 2-0068: chip found @ 0xd0 (saa7134[0])</p>
<p>tda9887 2-0043: chip found @ 0x86 (saa7134[0])</p>
<p>saa7134[0]: registered device video0 [v4l2]</p>
<p>saa7134[0]: registered device vbi0</p>
<p>saa7134 OSS driver for DMA sound loaded</p>
<p>saa7134[0]: registered device dsp1</p>
<p>saa7134[0]: registered device mixer1</p>
<p>DVB: registering new adapter (saa7134[0]).</p>
<p>tda9887 2-0043: chip found @ 0x86 (saa7134[0])</p>
<p>tveeprom 3-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 3</p>
<p></p>
<p>tuner 2-0061: chip found @ 0xc2 (saa7134[0])</p>
<p>tuner 2-0061: type set to 67 (Philips TD1316 Hybrid Tuner)</p>
<p>tuner 2-0068: chip found @ 0xd0 (saa7134[0])</p>
<p></p>
<p>DVB: registering new adapter (saa7134[0]).</p>
<p>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...</p>
<p></p>
<p>tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #0)</p>
<p>tda1004x: setting up plls for 48MHz sampling clock</p>
<p>tda1004x: found firmware revision 23 -- ok</p>
<p>tda9887 2-0043: chip found @ 0x86 (saa7134[0])</p>
<p>tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #0)</p>
<p></p>
<p>I'm a bit concerned about the duplication with the tda9887, wondering if the ivtv & std drivers play well together?</p>
<p></p>
<p></p>
<p></p>
<p></p>
</body></html>