So I also tried the following as a normal user:<br><br># aplay /dev/dsp1<br>Playing raw data '/dev/dsp1' : Unsigned 8 bit, Rate 8000 Hz, Mono<br><br>I could hear the sound from the TV feed. And it had a slight delay (which is what I gather should happen). Interstingly the sound played through the speakers connected to soundcard0 and not those connected to soundcard1 (the onboard sound card into which the the TV card audio is connected through the onboard CD-IN).
<br><br>When I unmute the CD-IN line using kmix, the sound from the TV feed comes through the speakers connected to the onboard. And there is no delay.<br><br>I also noticed that the backend reported the following:<br><br>
NVR: Only read -1 bytes of 4096 bytes from '/dev/dsp<br>read audio: Input/output error<br><br>This happened even when I changed the audio to /dev/dsp1 under the frontend setup. It then struck me that I hadn't changed the sound input of the capture card under mythtv-setup from /dev/dsp to /dev/dsp1. That solved all the issues.
<br><br>What saddened me most was realising that as stated on the alsa-project website, there is indeed no ALSA capture support for the Sound Blaster Live! 24-bit 7.1. Ah well.<br>