I get the same errors... it doesn't seem to affect anything.<br><br><div><span class="gmail_quote">On 3/20/06, <b class="gmail_sendername"><a href="mailto:clemens@dwf.com">clemens@dwf.com</a></b> <<a href="mailto:clemens@dwf.com">
clemens@dwf.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">What is the significance of this message?<br><br> b2c2-flexcop: i2c master_xfer failed
<br><br>I see it several times while booting with three (two different) video capture<br>cards.<br>Right off, it doesnt look good.<br><br>Here is (what appears to be) the complete set of messages during the boot:<br><br>---
<br><br><br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital<br>TV receiver chip loaded successfully<br><br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: will use the HW PID filter.<br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: card revision 2
<br>Mar 20 23:42:08 mythtv kernel: ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 22<br>(level, low) -> IRQ 177<br>Mar 20 23:42:08 mythtv kernel: DVB: registering new adapter (FlexCop Digital<br>TV device).<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: MAC address = 00:d0:d7:0e:6c:0c
<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: i2c master_xfer failed<br>Mar 20 23:42:08 mythtv last message repeated 2 times<br>Mar 20 23:42:08 mythtv kernel: mt352_read_register: readreg error (reg=127,<br>ret==-121)<br>
Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: i2c master_xfer failed<br>Mar 20 23:42:08 mythtv kernel: i2c_readbytes: i2c read error (addr 0a, err ==<br>-121)<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: found the lgdt3303 at i2c
<br>address: 0x59<br>Mar 20 23:42:08 mythtv kernel: DVB: registering frontend 0 (LG Electronics<br>LGDT3303 VSB/QAM Frontend)...<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: initialization of 'Air2PC/AirStar<br>2 ATSC 3rd generation (HD5000)' at the 'PCI' bus controlled by a 'FlexCopIIb'
<br>complete<br><br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: will use the HW PID filter.<br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: card revision 2<br>Mar 20 23:42:08 mythtv kernel: ACPI: PCI Interrupt 0000:03:02.0
[A] -> GSI 17<br>(level, low) -> IRQ 185<br>Mar 20 23:42:08 mythtv kernel: DVB: registering new adapter (FlexCop Digital<br>TV device).<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: MAC address = 00:d0:d7:0e:6c:0a
<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: i2c master_xfer failed<br>Mar 20 23:42:08 mythtv last message repeated 2 times<br>Mar 20 23:42:08 mythtv kernel: mt352_read_register: readreg error (reg=127,<br>ret==-121)<br>
Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: i2c master_xfer failed<br>Mar 20 23:42:08 mythtv kernel: i2c_readbytes: i2c read error (addr 0a, err ==<br>-121)<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: found the lgdt3303 at i2c
<br>address: 0x59<br>Mar 20 23:42:08 mythtv kernel: DVB: registering frontend 1 (LG Electronics<br>LGDT3303 VSB/QAM Frontend)...<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: initialization of 'Air2PC/AirStar<br>2 ATSC 3rd generation (HD5000)' at the 'PCI' bus controlled by a 'FlexCopIIb'
<br>complete<br><br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: will use the HW PID filter.<br>Mar 20 23:42:08 mythtv kernel: flexcop-pci: card revision 2<br>Mar 20 23:42:08 mythtv kernel: ACPI: PCI Interrupt 0000:03:04.0
[A] -> GSI 18<br>(level, low) -> IRQ 169<br>Mar 20 23:42:08 mythtv kernel: DVB: registering new adapter (FlexCop Digital<br>TV device).<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: MAC address = 00:d0:d7:02:53:e9
<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: i2c master_xfer failed<br>Mar 20 23:42:08 mythtv last message repeated 2 times<br>Mar 20 23:42:08 mythtv kernel: mt352_read_register: readreg error (reg=127,<br>ret==-121)<br>
Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: found the nxt2002 at i2c address:<br>0x0a<br>Mar 20 23:42:08 mythtv kernel: DVB: registering frontend 2 (Nextwave nxt2002<br>VSB/QAM frontend)...<br>Mar 20 23:42:08 mythtv kernel: b2c2-flexcop: initialization of 'Air2PC/AirStar
<br>2 ATSC 2nd generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete<br>Mar 20 23:42:08 mythtv kernel: ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19<br>(level, low) -> IRQ 193<br>Mar 20 23:42:08 mythtv kernel: Model 1006 Rev 00000000 Serial 10061102
<br>Mar 20 23:42:08 mythtv kernel: hw_random hardware driver 1.0.0 loaded<br>Mar 20 23:42:08 mythtv kernel: shpchp: Standard Hot Plug PCI Controller Driver<br>version: 0.4<br>Mar 20 23:42:08 mythtv kernel: ACPI: PCI Interrupt 0000:00:
1d.7[D] -> GSI 23<br>(level, low) -> IRQ 201<br><br>---<br><br>Im not sure exactly which messages go with the initialization of which card,<br>but<br>have tried to split the output (with blank lines) where it seems appropriate.
<br><br>The 'default' set of i2c devices are set in the kernel, do more need (which<br>ones)<br>to be set?<br><br>--<br> Reg.Clemens<br> <a href="mailto:reg@dwf.com">
reg@dwf.com</a><br><br><br>_______________________________________________<br>mythtv-users mailing list<br><a href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a><br><a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br></blockquote></div><br>