# XF86Config-4 (XFree86 X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xfree86 # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" #Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" Load "type1" Load "vbe" Load "xtt" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Matrox G450 1" Driver "mga" BusID "PCI:03:00:0" Option "DigitalScreen" Option "Crtc2Half" Option "HWCursor" "off" # Option "hw cursor" "off" Option "Rotate" "ccw" Option "MGASDRAM" VideoRAM 32768 EndSection Section "Device" Identifier "Matrox G450 2" Driver "mga" BusID "PCI:03:04:0" Option "DigitalScreen" Option "Crtc2Half" Option "HWCursor" "off" # Option "hw cursor" "off" Option "Rotate" "ccw" Option "MGASDRAM" VideoRAM 32768 EndSection Section "Device" Identifier "Matrox G450 3" Driver "mga" BusID "PCI:3:8:0" Option "DigitalScreen" Option "Crtc2Half" Option "HWCursor" "off" # Option "hw cursor" "off" Option "Rotate" "cw" Option "MGASDRAM" VideoRAM 32768 EndSection Section "Device" Identifier "Matrox G450 4" Driver "mga" BusID "PCI:3:12:0" Option "DigitalScreen" Option "Crtc2Half" Option "HWCursor" "off" # Option "hw cursor" "off" Option "Rotate" "ccw" Option "MGASDRAM" VideoRAM 32768 EndSection Section "Monitor" # AOpen 19" LCD #(II) MGA(1): Manufacturer's mask: 0 #(II) MGA(1): Supported Future Video Modes: #(II) MGA(1): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 #(II) MGA(1): Supported additional Video Mode: #(II) MGA(1): clock: 108.0 MHz Image Size: 376 x 301 mm #(II) MGA(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 #(II) MGA(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 #(II) MGA(1): Serial No: 52002046LE46 #(II) MGA(1): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz #(II) MGA(1): Monitor name: F90JS Identifier "F90JS" # HorizSync 30-60 # VertRefresh 50-75 Option "DPMS" EndSection Section "Monitor" # Viewsonic 19" LCD #(II) MGA(0): Supported additional Video Mode: #(II) MGA(0): clock: 108.0 MHz Image Size: 376 x 301 mm #(II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 #(II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 #(II) MGA(0): Serial No: A1W0521A3700 #(II) MGA(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz #(II) MGA(0): Monitor name: VP191b Identifier "VP191b" # HorizSync 30-60 # VertRefresh 50-75 Option "DPMS" EndSection Section "Monitor" # Fuji PLUS 19" LCD #(II) MGA(2): Supported Future Video Modes: #(II) MGA(2): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 #(II) MGA(2): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 #(II) MGA(2): Supported additional Video Mode: #(II) MGA(2): clock: 108.0 MHz Image Size: 338 x 270 mm #(II) MGA(2): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 #(II) MGA(2): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 #(II) MGA(2): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 130 MHz #(II) MGA(2): Monitor name: FujiPLUS Identifier "FujiPLUS" # HorizSync 30-60 # VertRefresh 50-75 Option "DPMS" EndSection Section "Screen" Identifier "G450_1_Screen" Device "Matrox G450 1" Monitor "F90JS" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "G450_2_Screen" Device "Matrox G450 2" Monitor "VP191b" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "G450_3_Screen" Device "Matrox G450 3" Monitor "FujiPLUS" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "G450_1_Screen" Screen "G450_2_Screen" LeftOf "G450_1_Screen" Screen "G450_3_Screen" RightOf "G450_1_Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" Option "Xinerama" Option "BlankTime" "10" # Blank the screen in 10 minutes (Fake) Option "StandbyTime" "20" # Turn off screen in 20 minutes (DPMS) Option "SuspendTime" "23" # Full hibernation in 30 minutes (DPMS) Option "OffTime" "25" # Turn off DPMS monitor (DPMS) EndSection #Section "DRI" # Mode 0666 #EndSection