Hi.. Im trying to build a myth-tv system that has a satellite box
connected to a pvr-250, and has a usb digital terrestrial receiver.
Individually I can get either to work fine, but when I add both cards
to myth using mythtv-setup, I end up only being able to watch channels
from the first defined card. <br>
<br>
A few more details: the satellite box has its uhf modulated output
connected to the pvr-250's tuner [fixed as channel 47], and myth uses a
command line util to drive an ir thingy to change the channels on the
receiver. The card is configured within myth to have a selection of
channels available from a video source etc, and all works well if this
is the only card configured.<br>
<br>
The usb dvb-t device is receiving the local digital terrestrial
broadcast, and has its channels configured, there are no duplicate
channels between the pvr250 and the dvb-t. This also works fine, if it
is the only card configured. <br>
<br>
When both cards are added, and their sources &amp; channels all added
to myth, the first card defined 'wins' and although the channels from
the second card show up in the epg, they are not selectable by entering
their channel no. The 'c' key which seems to be configured to toggle
the tuner inputs causes a momentary pause in the video, but then it
just resumes on the current channel.. enabling channel navigation from
the epg doesnt help either, it wont entering a no for a channel not on
the first defined card does not switch the channel to it. <br>
<br>
I've had a good search and found other people reportedly having myth
working with similar configurations of pvr250/dvb-t, so I guess I've
just gone wrong somewhere.. <br>
<br>
Can anyone help me work though fixing this? Where should I start
looking ? mythbackend / mythfrontend dont seem to be reporting any
obvious errors to the console.. [all based from knoppmyth r5a16]<br>
<br>
Thanks in advance, <br>
MythMonkey<br>
<br>
<br>