<P>I have a PVR350 (Svideo Out to TV) and a PVR 150. From the same source, I am getting different quality on the same channel. Channel 28 (Cable-HSRC) is fuzzy on the the 350 compared to the crisp 150. I have switched inputs and the problems stays with the 350. I believe this is the only channel that is giving me some problems. </P>
<P>I wouldn't worry about it but one of my users(spouse), likes to tape several shows on this channel. </P>
<P>** itvt dmesg output **<BR><FONT size=2><BR>ivtv: ==================== START INIT IVTV ====================<BR>ivtv: version 0.3.8 (svn snapshot revision ) loading<BR>ivtv: Linux version: 2.6.11-1.35_FC3 686 REGPARM 4KSTACKS gcc-3.4<BR>ivtv: In case of problems please include the debug info<BR>ivtv: between the START INIT IVTV and END INIT IVTV lines when<BR>ivtv: mailing the ivtv-devel mailinglist.<BR>ivtv: Autodetected WinTV PVR 350 card (iTVC15 based)<BR>ivtv: Unreasonably low latency timer, setting to 64 (was 32)<BR>ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]<BR>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0<BR>ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]<BR>ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]<BR>saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)<BR>ivtv: i2c attach to card #0 ok [client=saa7127, addr=44]<BR>msp34xx: ivtv version<BR>ivtv: i2c attach to card #0 ok [client=MSP3448W-A2,
addr=40]<BR>ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]<BR>ivtv: loading /lib/modules/ivtv-fw-enc.bin<BR>ivtv: loading /lib/modules/ivtv-fw-dec.bin<BR>ivtv: Encoder revision: 0x02040011<BR>ivtv: Decoder revision: 0x02020023<BR>ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<BR>ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<BR>ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<BR>ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<BR>ivtv: Create encoder radio stream<BR>ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)<BR>ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)<BR>ivtv: Create decoder VOUT stream<BR>ivtv: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)<BR>tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0<BR>ivtv: Initialized WinTV PVR 350, card #0<BR>ivtv:
====================== NEXT CARD ======================<BR>ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)<BR>ivtv: Unreasonably low latency timer, setting to 64 (was 32)<BR>ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]<BR>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1<BR>ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]<BR>ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]<BR>ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]<BR>ivtv: loading /lib/modules/ivtv-fw-enc.bin<BR>ivtv: Encoder revision: 0x02040011<BR>ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<BR>ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<BR>ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<BR>ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<BR>tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #1<BR>ivtv: Initialized WinTV
PVR 150, card #1<BR>ivtv: ==================== END INIT IVTV ====================<BR>ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)<BR>ivtv-osd warning: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.<BR>ivtv-osd: screen coords: [0 0] -> [720 480]<BR>ivtv-osd: original global alpha = 208<BR>ivtv-osd: current OSD state = 39<BR>ivtv-osd: new global alpha = 208 (1 255 0)<BR>ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe1c90000, size 1350k<BR>ivtv-osd: mode is 720x480x32, linelength=2880<BR>ivtv-osd: fb1: iTVC15 TV out frame buffer device<BR>ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)<BR>ivtv: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]<BR>ivtv: i2c attach to card #1 ok [client=Hauppauge IR (PVR150), addr=71]<BR>ivtv: Tried to open YUV output device but need to send data to mpeg decoder before it can be used<BR>ivtv: Tried to open YUV output device but need to send data to mpeg decoder before
it can be used<BR>ivtv-osd warning: Need to adjust to width 336 src_w 336 dst_w 720 src_x 0 dst_x 0<BR>ivtv-osd warning: Need to adjust to height 240 src_h 240 dst_h 480 src_y 0 dst_y 0<BR>ivtv-osd warning: Using progressive mode<BR>ivtv warning: Enable video output<BR>ivtv-osd warning: Need to adjust to width 480 src_w 480 dst_w 854 src_x 0 dst_x -66<BR>ivtv-osd warning: Need to adjust to height 480 src_h 480 dst_h 640 src_y 0 dst_y -80<BR>ivtv-osd warning: Using progressive mode<BR>ivtv warning: Enable video output<BR></FONT><BR>Any suggestions?<BR><BR>Steve<BR>Fedora Core3<BR>MythTV 18.1<BR>ivtv 0.3.8<BR>cable-hsrc (NTSC)</P><p>
<hr size=1>Yahoo! for Good<br>
Watch the Hurricane Katrina <a href="http://advision.webevents.yahoo.com/shelter">Shelter From The Storm concert</a>